Xerox WorkCentre 5330 User Manual

Printing
WorkCentre 5300 Series Multifunction Printer
User Guide
73
Printing Booklets
With 2-sided printing, you can print a document in the form of a small booklet. Create booklets for any
paper size that is supported for 2-sided printing. The driver automatically reduces each page image
and prints four page images per sheet of paper (two on each side). The pages are printed in the correct
order so that you can fold and staple the pages to create the booklet.
Note: Booklets can be created using A4/210 mm x 297 mm (8.5 x 11 in.) paper, and
A3/297 mm x 420 mm (11 x 17 in.) paper.
When you print booklets using the Windows PostScript or Macintosh driver, you can specify the gutter
and creep.
• Gutter: Specifies the horizontal distance (in points) between the page images. A point
is 0.35 mm (1/72 in.).
• Creep: Specifies how much the page images are shifted outward (in 10ths of a point). This
compensates for the thickness of the folded paper, which otherwise would cause the page images
to shift slightly outward when folded. You can select a value from zero to 1 point.
Gutter Creep

Xerox WorkCentre 5330 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed	Up to 30 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Hard Drive	80 GB
Copy Speed	Up to 30 cpm
Operating System Compatibility	Windows, Mac, Linux
Connectivity	USB 2.0
Paper Sizes	A4, A5, B5
Scan Destinations	Scan to Email, Network, USB
Fax Speed	33.6 kbps
Duplex Printing	Automatic