Xerox WorkCentre 5330 User Manual

Printing
WorkCentre 5300 Series Multifunction Printer
User Guide
63
2. If required, move the paper tray guides further out to load the new envelopes. To adjust the side
and front guides, pinch the guide lever on each guide and slide the guides to their new position. To
secure the guides in position, release the levers.
3. Load the envelopes in the envelope tray flap side down. Flaps should be closed and on the leading
edge, toward the left side of the tray.
Notes:
• Printing will appear on the side facing up.
• Do not load envelopes above the maximum fill line. Doing so may cause jams.
4. Adjust the guides in the envelope tray so they touch the edges of the stack.
5. Push the tray completely into the printer.
6. If you have changed the envelope size: on the printer touch screen, touch Change Settings,
choose the envelope size on the touch screen, touch Save, then touch Confirm.
7. If you are loading more envelopes of the same size, touch Confirm on the touch screen.
wc53xx-033
wc53xx-032
wc53xx-035

Xerox WorkCentre 5330 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed	Up to 30 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Hard Drive	80 GB
Copy Speed	Up to 30 cpm
Operating System Compatibility	Windows, Mac, Linux
Connectivity	USB 2.0
Paper Sizes	A4, A5, B5
Scan Destinations	Scan to Email, Network, USB
Fax Speed	33.6 kbps
Duplex Printing	Automatic