Administrator Tools
254 Xerox
®
WorkCentre
®
6655 Color Multifunction Printer
System Administrator Guide
Updating the Printer Software
You can update your printer when Xerox releases a new version of printer software or firmware.
Before You Begin
• Determine the current software version of your printer.
• Download the latest software update file in .dlm format from the Xerox Support website at
www.xerox.com/office/WC6655support.
Determining the Printer Software Version
1. In CentreWare Internet Services, click Properties>General Setup.
2. Click Configuration Report.
3. To verify the software installed on your printer, scroll down to Software Versions.
Manually Upgrading the Printer Software
1. In CentreWare Internet Services, click Properties>General Setup>Software Upgrade.
2. If the feature is not displayed, click Allow Upgrade.
3. Under Manual Upgrade, to locate and select the software upgrade file in .dlm format, click Browse
or Choose File.
4. Click Open or Choose File.
5. Click Install Software.
Notes:
• Software installation begins several minutes after you submit the software to the printer.
• Once installation begins, CentreWare Internet Services is disabled.
• You can monitor the installation progress from the printer control panel.
6. Click OK.
7. To verify that the software updated, check the configuration report.
Note: The Software Upgrade page displays the date, time, and version of the latest successful
upgrade.
To Next Page
Loading...
Need help?
General
