Page 28
STEP 1: FRONT, REAR AND CENTRE DIFFERENTIALS
(148624) Shim 8 x 12 x 0.2mm -- 2
(149563) Ball Bearing 8 x 16 x 5mm -- 2
STEP 2: FRONT AND REAR DIFFERENTIAL PINION GEARS
(149895) Pin 4 x 26.6mm -- 6
(149899) O-Ring 3 x 1mm -- 12
(149895) Pin 2.5 x 12.8mm -- 6
(149563) Ball Bearing 8 x 16 x 5mm -- 6
(148623) Shim 8 x 12 x 0.4mm -- 3
(148602) Flat Head Tapping Screw 3 x 16mm -- 12
(148570) Grub Screw w/Threadlock 4 x 4mm -- 3
ExPLODED vIEW ASSEmbLY DRAWINGS
Continued On Next Page
To Next Page
Loading...
