Xtool IP500-TLS - More; How to Diagnose Vehicles; My Vehicles; Vehicle Coverage List

9
3.3.6 More
This section allows you to perform several tasks:
 Set up the user account and workshop profile, if applicable.
 Access firmware information.

You can view the diagnostic report here.

Change the language

Modify the measurement units during the diagnostic process.
 Etc...
4.How to Diagnose Vehicles
This chapter covers the fundamental operation of the Diagnostic Tool function.
The Diagnostic Tool function enables communication with a vehicle's electronic
control systems. This capability allows you to retrieve diagnostic trouble codes
(DTCs), view PID data, and perform advanced functions such as resets, relearns,
matchings, adaptations, initializations, and more.
4.1 My Vehicles
"My vehicles" function allows you to add the diagnostic programs you use often to
save time navigating the vehicles.
Click "Diagnostic" icon on the diagnostic screen, you will see "My vehicles" listed in
the top left taskbar. To add diagnostic program that you use often into this section,
click the add icon> select the brand of your vehicle > click "completed" to finish
adding brands operations.
To remove a diagnostic program for "My vehicles" list, click the pen icon select the
diagnostic program you want to remove> click "Remove" to finish removing it from
the list.
4.1.1 Vehicle Coverage List
To check compatibility, please consult tech support via support@xtoolonline.com at
any time or refer to our website: https://www.xtoolonline.com
/support/vehicle-coverage (for reference only, subject to confirmation from tech
support: support@xtoolonline.com).