6.5 Injector Coding
This function can write the identification code of the fuel injector into the ECU so
that the ECU can recognize the new injector.
After the ECU or injector is replaced, the injector code of each cylinder must be
confirmed or re-coded so that the cylinder can better identify injectors to accurately
control fuel injection.
In general cases, there is no need to perform the coding matching function after
cleaning;
The identification of the fuel injector includes its working accuracy value and type
value. When replacing an injector you need to find the corresponding model for
replacement; At present, mainstream cars support injector coding functions.
The operation guidelines of the Injector Coding function are shown as below:
Step 1: Enter the Injector coding menu and choose relevant chassis models
according to the vehicle being tested.
To Next Page
Loading...
