Legal Information
Trademarks
XTOOL is a registered trademark of Shenzhen XTOOL Technology Co., Ltd., in the
United States and other countries. This publication includes trademarks owned by
Shenzhen XTOOL Technology Co., Ltd., such as XTOOL. Any other trademarks
mentioned are the property of their respective owners.
Copyright Information
No part of this manual may be reproduced, stored in a retrieval system or
transmitted, in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise without the prior written permission of XTOOL.
© 2017 Shenzhen XTOOL Technology Co., Ltd. All rights reserved.
Disclaimer of Warranties and Limitation of Liabilities
The pictures and illustrations are for reference only. The information, specifications,
and illustrations in this manual were accurate when it was printed and may change
without notice. The authors have taken care in preparing this manual, but it does
not:
● Change the standard terms and conditions of the purchase, lease, or rental agree-
ment through which the equipment covered by this manual was acquired.
● Increase liability to the customer or third parties in any way.
XTOOL will not be responsible for any direct, special, incidental, or indirect damages,
including economic losses such as lost profits.
XTOOL® also reserves the right to make changes at any time without prior notice.
IMPORTANT:
Before you start using or maintaining this unit, make sure to read this manual
thoroughly. Pay close attention to the safety warnings and precautions provided.
To Next Page
Loading...
