Xtool IP500-TLS - To Exit the Diagnostic Program; Exiting Diagnostics; Diagnostic Report

26
4.10.8 To Exit the Diagnostic Program
Exiting all diagnostic programs and returning to the main diagnostic screen will end
the diagnosis.
4.10.9 Exiting Diagnostics
Diagnostics remain active as long as there is an active communication link with the
vehicle. To exit tests and turn off the Diagnostic Tool, you must first interrupt this
communication link. A warning message will appear if you manage to shut down the
Diagnostic Tool while it is communicating with the vehicle.
NOTE:
Damage to the vehicle's electronic control module (ECU) may occur if
communication is disrupted. Always ensure the main cable is securely connected
during testing. Be sure to exit all tests before disconnecting the main cable or
turning off the Diagnostic Tool.
4.11 Diagnostic Report
After completing the diagnostics and returning to the main screen, enter the VIN,
mileage, and model year. Click "OK" on the report generation form to create a
diagnostic report for later review or sharing.