4.9.1.2 Manual Input
When the automatic scan cannot identify the vehicle, it is recommended to
manually input the VIN to recognize the vehicle.
There are four reasons why it cannot be scanned automatically.
The vehicle is too old to come with AUTO SCAN function on itself.
The VIN is not written in the ECU of the vehicle, you will need to write the VIN in
the ECU first.
The VIN is too rare or too new and it is not recorded in the VIN database.
Vehicle of the same model might have different configurations and the
information provided in VIN is not enough to select the correct vehicle, so you
will need to manually select the configurations.
4.9.2 Diagnostic
Click "Diagnostic" icon on the screen, the Diagnostic Tool will bring up vehicle
selection menu.
NOTE:
In cases where vehicle VIN numbers cannot be decoded, if both Auto Identification
and Manual Input failed, it is recommended to try using Manual Selection instead.
To Next Page
Loading...
