Step 2: Connect the vehicle and tablet using the main test cable.
Step 3: Turn on the vehicle's ignition switch to start the diagnostic process.
The connection method is shown in the figure below:
❶ Vehicle
❷ OB15 to OBD2-16 Main Cable
❸ Tablet
NOTE:
If the OBD port of your vehicle is located on the chassis or in a hard-to-reach area,
you can contact us to purchase an OBD extension cable for easier operation.
4.9 Diagnose Vehicles
To ensure proper communication and diagnostics, the vehicle must be correctly
identified. The vehicle identification process is menu-driven, and you should follow
the screen prompts to enter the required information. Exact procedures may vary
depending on the region and the vehicle manufacturer.
Steps to Identify a Vehicle:
Step 1: Follow the screen prompts to enter the necessary vehicle information.
Step 2: Options for Vehicle Identification include:
⚫ VIN (Vehicle Identification Number)
To Next Page
Loading...
