● Knowledge and Skill: The automotive technician must be knowledgeable about the
system being tested. Familiarize yourself with proper service methods and test
procedures.
● Acceptable Testing Practices: Perform tests in a manner that ensures your safety,
the safety of others, and prevents damage to the device and the vehicle.
Specific Responsibilities:
● Refer to Manufacturer Guidelines: Always consult and follow the safety messages
and applicable test procedures from the vehicle or equipment manufacturer
before using the device.
● Use Appropriate Tools and Techniques: Due to the variety of test applications and
product variations, it's important to use the correct tools and techniques for each
specific task.
● Anticipate Safety Requirements: While this manual provides comprehensive
guidance, it cannot cover every potential situation. Technicians must be prepared
to handle unforeseen circumstances safely.
By adhering to these guidelines and responsibilities, you can ensure a safe and
effective working environment while using the device.
Safety Messages
Safety messages are included to prevent both personal injury and damage to
equipment. Each safety message begins with a signal word that indicates the level of
hazard involved.
Danger
This signal word "indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury to the operator or to bystanders."
Warning
This signal word "indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury to the operator or to bystanders."
To Next Page
Loading...
