Follow the instructions on the device screen until you see a confirmation of
''successful operation.''
6.7 ABS Bleeding
Anti-Lock Braking System keeps the tires from locking up immediately when there
are brakes. Keeping ABS in good condition can give full play to the effectiveness of
the brakes, shorten the braking time and distance, prevent the vehicle from skidding
and tailing during emergency braking, ensure good driving stability and steering
maneuverability, and avoid violent friction between the tires and the ground to
reduce tire wear. When the ABS contains air, the ABS bleeding function must be
performed to bleed the brake system to restore ABS brake sensitivity. ABS Bleeding
can be performed in the following cases:
● Replace the rear brake distributor pump or the front brake distributor pump
● Severe brake fluid shortage
● Change the brake fluid
The operation guidelines of the ABS Bleeding function are shown as below:
Enter the ABS Bleeding menu and choose relevant models according to the vehicle
being tested.
To Next Page
Loading...
