5. Defects in appearance, cosmetic, decorative, or structural items such as framing
and non-operating parts;
6. Products damaged from external causes such as fire, dirt, sand, battery leakage,
blown fuse, theft, or improper usage of any electrical source.
12. Appendix
12.1 Navigation Path Quick Check
Misfire Counters: Auto Identification> ISO 15765-4 Module $000007E8> On-Board
Monitor Test> Misfire Cylinder 1 Data> Misfire count for last/current driving cycles
Fuel Loop Status: Go Diagnostic> Region> Make> Model> Year> System Selection>
Full System Diagnosis> Engine Electronics> Live Data> Packet Data flow> Status of Oil
Pressure Switches
Readiness Status(Smog Check): OBD-II> I/M Readiness Status
Transmission Oil Temperature: Go Diagnostic> Region> Make> Model> Year> System
Selection> Full System Diagnosis>Transmission> Live Data> Transmission Fluid
Temperature Filtered
12.2 Terms & Terminology Quick Check
LTFT= Short for Long Term Fuel Trim
STFT= Short for Short Term Fuel Trim
MIS= Short for Misfire
I/M Readiness Status= Technical term for Smog Check
VGT Turbo Actuator Calibration= Turbo Actuator Pre-Align/Self Calibrate
Cam Crank Relearn= Cam Pattern Relearn
Crankshaft Position Variation Learn= Crankshaft Relearn= CASE Learning= Gear
Learning
To Next Page
Loading...
