4.4 Actuation Test
Actuation test, also known as bidirectional control, is a generic term used to describe
sending and receiving information between one device and another. The scan tool
can request information or command a module to perform specific tests or functions.
Some manufacturers refer to the bidirectional controls as function tests, actuation
tests, inspection tests, system tests. Reinitialization and reprogramming would also
be included in the list of bidirectional controls. Most enhanced scan tools also can
actuate relays, injectors, and coils, perform system tests, etc. Users could check the
individual part to see which part is working properly by actuation test.
4.5 Demo Program
The "DEMO" program simulates the vehicle navigation process, displays available
function options, and demonstrates the appearance of the menu. It serves as a
training tool to familiarize yourself with the operations and capabilities of the
Diagnostic Tool.
IMPORTANT:
The DEMO program may not display the most current vehicle diagnostic procedures
or the actual screen interface. It is not intended for checking vehicle coverage or
compatibility.
4.6 Wi-Fi Connection
This Diagnostic Tool can connect to 2.4 GHz or 5.0 GHz Wi-Fi or hotspot. Click More>
Settings> Wi-Fi connection> Switch on Wi-Fi connection> Select the Wi-Fi you want
to connect and enter the password to connect.
If the Wi-Fi connection is unstable, or if you are in an area without access to home
Wi-Fi, you can connect to your mobile phone hotspot instead.
How to turn on the mobile hotspot:
ā For iOS users
To Next Page
Loading...
