Go to Settings> Turn on cellular network> Personal Hotspot> Switch on ''Allow
Others to Join'' and ''Maximize Compatibility'' to set up your phone’s hotspot. Then,
connect the Diagnostic Tool to the hotspot by following the steps mentioned earlier.
● For Android users
Go to Settings> Wireless & networks> Tethering & portable hotspot> Portable WLAN
hotspot> Switch on hotspot> Configure WLAN hotspot> Encryption Type> WPA2 PSK.
In ''Show Advanced Options,'' ensure that ''Max connections allowed'' has available
slots for the Diagnostic Tool.
NOTE:
A Wi-Fi connection is not necessary for diagnostics with most vehicle brands.
However, for certain brands, like Peugeot, that require access to an online server for
diagnostics, it is essential to connect to Wi-Fi.
4.7 Product Activation
Step 1: Select an available Wi-Fi network.
Step 2: For first-time users, after pressing and holding the power button to turn on
the system, the system will automatically enter a guided process and prompt the
user to enter a valid email address and set a login password. Click "Register" to open
the registration page. If you have already registered, click the login button and enter
your email and password to log in.
Step 3: Click "Start to use" to enter the diagnostic system and begin using the device.
To Next Page
Loading...
