HeiTel by Xtralis ipVG Product Guide
29794_00 47
Logfile entry Description Optional Error
relay
[D&T], V.out input
opened
The control output V.out has been opened. yes no
Status messages to the serial control
[D&T], External input
[x] (cam [y])
sabotaged
The External input indication in field [x] with the
corresponding camera [y] has been sabotaged.
yes no
[D&T], External input
[x] (cam [y]) alarmed
The External input indication in field [x] with the
corresponding camera [y] has been alarmed.
yes no
[D&T], External input
[x] (cam [y]) secured
The External input indication in field [x] with the
corresponding camera [y] has been secured.
yes no
[D&T], External
command:
XXXX,OK
The serial command XXXX was successfully processed
(XXXX = four-digit command).
yes no
[D&T], External
command:
XXXX,ERROR
The serial command XXXX was not successfully processed
(XXXX = four-digit command).
yes no
Status messages for CI Adapter/CIO Adapter
[D&T], External
input: xx (cam: yy)
closed
Input for the CI Adapter/CIO Adapter has been closed.
xx= Input for the CI Adapter/CIO Adapter (01 - 50)
yy= Camera number configured in the
sender setup at the time the camera is triggered (01 -
10)
yes no
[D&T], External
input: xx (cam: yy)
opened
Input for the CI Adapter/CIO Adapter has been opened.
xx= Input for the CI Adapter/CIO Adapter (01 - 50)
yy= Camera number configured in the
transmitter set-up at the time the
camera is triggered (01 - 10)
yes no
Status message for the HDD safe power down functions
[D&T], HDD
deactivated
The logfile entry is written before the storage medium is
deactivated via one of the HDD safe power down functions.
yes yes
Positive messages
[D&T], Video signal
ok on input, [x]
This message is written if a valid video signal was detected
following a video signal error for video input [x].
To Next Page
Loading...
General