ipVG Product Guide HeiTel by Xtralis
60 29794_00
Alarm
Alarm inputs Arm / Disarm input:
Triggered manually or by software = not activated;
Triggered by input = activated
Connect = not activated; Trigger level = Normally closed
Tamper input:
Trigger level = Normally opened
Camera alarm For all cameras:
Trigger level = Normally opened; Mode = Off;
(Entry/Exit timeout = 10s); Linked with Motion = not activated
Video loss For both cameras:
Connect = not activated
Site Archive
Archive passwords No archive password entered
HDD For all commands: not activated
POS/ATM/IBIS POS/ATM/IBIS; for all cameras:
Recording = not activated; Type = POS; Track size (%) = 50; Line lenght = 57;
Delete track = not activated
Keywords; for all cameras:
Keyword = not defined; All = activated
Track settings Mode = Duplex = Live image transmission and Recording or Archive evaluation;
Track division = identical partitioning of maximum storage capacity for all camera
tracks
Video x in For all video inputs:
All set to continuous recording ;
Event recording always = not activated;
Record preview images = not activated;
Overwrite protection= not activated (preset warning threshold= 90%);
Report period less than= not activated (preset = 30 days);
Delete all pictures older than= not activated (preset= 30 days);
Event recording For all video inputs:
Event trigger:
Trigger via contact = Normally opened;
Trigger via serial command= Off;
Retrigger at= not active (preset= 75%);
Event size:
Desired number of events= 5,000; Duration Pre-alarm (s)= 5;
Interval Pre-alarm (s) = 1; Duration Alarm (s) = 15 s;
Interval Alarm (s) = 0 (quickest possible)
To Next Page
Loading...
General