To Next PageTo Next Page
Need help?Do you have a question about the Yaesu VX-6E and is the answer not in the manual?
General| Brand | Yaesu |
|---|---|
| Model | VX-6E |
| Category | Transceiver |
| Language | English |
Explains the main operational controls like volume, tuning, and power.
Details primary, secondary, and third functions for keys on the left.
Details functions for keys on the right side and numeric keypad.
Procedures for installing the main rechargeable battery pack.
Steps and indicators for charging the battery pack.
Basic steps to turn the radio on/off and set audio volume.
How to set the squelch level to mute background noise.
Ways to tune frequencies using the dial and keypad.
Introduction to the scanner function and its controls.
Basic steps for transmitting audio and understanding power indicators.
How to lock the keypad and controls to prevent accidental changes.
Explains repeater frequency offsets and automatic setting.
How to manually set shift direction and change default offsets.
How to use CTCSS tones for repeater access and selective calling.
How to use DCS codes for selective calling.
How to use split tones and the 1750 Hz tone for repeater access.
Steps for storing frequencies and settings into memory.
How to scan frequencies in VFO mode.
How to monitor a priority channel while scanning others.
How to configure smart search and store found frequencies.
How to set up tone pairs for EPCS operation.
How to use the emergency channel feature.
How the radio automatically transmits ID in emergencies.
How to set EAI mode, transmit time, and activate the feature.
How to use EAI to find a lost operator.
How to set up and use the ARTS™ feature for range monitoring.
How to set up a password to prevent unauthorized use.
How to reset all settings to factory defaults.
How to transfer data between transceivers.
