Yaesu VX-6E - Set (Menu) Mode; Set Mode Activation and MY MENU Shortcuts

VX-6E OPERATING MANUAL 85
RESET PROCEDURES
In the event of erratic operation of the transceiver, it is possible that data on the micropro-
cessor may have become corrupted. While this is a highly unusual situation, the only path
to recovery may involve resetting of the microprocessor. Here’s how to do this:
MICROPROCESSOR RESETTING
To clear all memories and all other settings to factory defaults:
1. Turn the radio off.
2. Press and hold in the
[
MODE
(
SP S
)
SQ TYP
]
,
[
0
(
SET
)]
, and
[
V/M
(
DW
)
MT
]
keys
while turning the radio on.
3. Press the
[
F/W
]
key momentarily to reset all settings to their factory defaults (press
any other key to cancel the Reset procedure).
SET MODE RESETTING
To reset the Set Mode Item settings to their factory defaults:
1. Turn the radio off.
2. Press and hold in the
[
MODE
(
SP S
)
SQ TYP
]
and
[
V/M
(
DW
)
MT
]
keys while turn-
ing the radio on.
3. Press the
[
F/W
]
key momentarily to reset the Set (Menu) mode settings to their fac-
tory defaults (press any other key to cancel the Reset procedure).