Yaesu VX-6E - Miscellaneous Settings; Password Protection Setup

VX-6E OPERATING MANUAL74
12. If you store other numbers, repeat steps 3- 11 above, using a different DTMF memory
register.
13. When all required DTMF memories are filled to your satisfaction, press the PTT
switch to save the settings and exit to normal operation
You may check your work by monitoring the entered DTMF string. To do
this, repeat steps 1- 4 above, then press the [F/W] key.
To send the telephone number:
1. Press the
[
F/W
]
key, followed by the the
[
3
(
DTMF
)]
key, then rotate the DIAL knob
to select “
AUTOAUTO
AUTOAUTO
AUTO.”
2. Press the
[
3
(
DTMF
)]
key to save the new setting and exit to
normal operation.
3. While the DTMF Autodialer is activated, first press the PTT switch, then press the
numerical key
([
1
]
through
[
9
])
corresponding to the DTMF memory string you wish
to send. Once the string begins, you may release the PTT switch, as the transmitter
will be held “on the air” until the DTMF string is completed.
4. To disable the DTMF Autodialer, press the
[
F/W
]
key, followed by the the
[
3
(
DTMF
)]
key, then rotate the DIAL knob to select “
MANUALMANUAL
MANUALMANUAL
MANUAL.”
DTMF OPERATION