Yaesu VX-6E - Page 100

VX-6E OPERATING MANUAL98
Set Mode Item 42
[
OPN.MSG
]
Function: Selects the Opening Message that appears when the radio is powered on.
Available Values: DC/MSG/OFF
Default: DC
DC: DC supply voltage
MSG: Set by user. See below.
OFF: No Opening Message
Here’s how to program the Opening Message:
1. Set this Set Mode Item to “
MSGMSG
MSGMSG
MSG.”
2. Press the
[
MODE
(
SPS
)
SQ TYP
]
key momentarily to enable programming of the
opening message. You will notice the first character entry’s location blinking.
3. Rotate the DIAL knob to select the first letter/number of the message, then press the
[
MODE
(
SPS
)
SQ TYP
]
key momentarily to save the first letter/number and move
on to the next character.
4. Repeat the previous step as necessary to complete the message (up to six characters).
5. If you make a mistake, press the
[
BAND
(
SCN
)
BND DN
]
key to back-space the
cursor; now re-enter the correct letter/number.
6. When you have entered the desired opening message, press the
[
0
(
SET
)]
key mo-
mentarily to confirm the message, then press the PTT key to save the settings and exit
to normal operation.
Set Mode Item 43
[
PAGER
]
Function: Enables/disables the Enhanced CTCSS Paging & Code Squelch function.
Available Values: OFF/ON
Default: OFF
Set Mode Item 44
[
PAG.ABK
]
Function: Enables/disables the Answer Back function of the Enhanced CTCSS Paging &
Code Squelch.
Available Values: OFF/ON
Default: OFF
Set Mode Item 45
[
PAG.CDR
]
Function: Setting the Receiver Pager Code for the Enhanced CTCSS Paging & Code
Squelch.
See page 60 for details.
Set Mode Item 46
[
PAG.CDT
]
Function: Setting the Transmitting Pager Code for the Enhanced CTCSS Paging & Code
Squelch.
See page 60 for details.
SET
(
MENU
)
M
ODE