Yaesu VX-6E - Page 95

VX-6E OPERATING MANUAL 93
Set Mode Item 9
[
BP LVL
]
Function: Adjust the Beep volume level.
Available Values: LVL 1 - LVL 10
Default: LVL 5
Set Mode Item 10
[
BNK NM
]
Function: Stores Alpha-Numeric “Tags” for the Memory Group.
See page 41 for details.
Set Mode Item 11
[
BSY.LED
]
Function: Enables/Disables the BUSY LED while the Squelch is open.
Available Values: ON/OFF
Default: ON
Set Mode Item 12
[
CH CNT
]
Function: Selects the Channel Counter Search Width.
Available Values: ±5 MHz/±10 MHz/±50 MHz/±100 MHz
Default: ±5 MHz
Set Mode Item 13
[
CLK.SFT
]
Function: Shifting of the CPU clock frequency.
Available Values: OFF/ON
Default: OFF
This function is only used to move a spurious response “birdie,” should it fall on a desired
frequency.
Set Mode Item 14
[
CW ID
]
Function: Programs and activates the CW Identifier (used during ARTS operation).
See page 67 for details.
Set Mode Item 15
[
CWTRNG
]
Function: Enables/Disables the CW Training feature and selects the sending speed of the
Morse Code chanacter groups.
Available Values: OFF/4/5/6/7/8/9/10/11/12/13/15/17/20/24/30/40 WPM or
OFF/20/25/30/35/40/45/50/55/60/65/75/85/100/120/150/200 CPM
Default: OFF
Note: To switch units between “WPM” and “CPM,” just press the
[
V/M
(
DW
)
MT
]
key.
Set Mode Item 16
[
DC VLT
]
Function: Indicates the DC Supply Voltage.
SET
(
MENU
)
M
ODE