Yamaha 2010 YZF-R6 User Manual

– 11 –
5. Fitting the Extention Funnel
Attach the extension funnel to the standard secondary funnel. Note the direction of the groove
on the extension funnel and connect with wire so that it does not turn and come off.
6. Fitting the Secondary Funnel
Fit the standard rubber seal to the secondary funnel before attaching the lever assembly.
Ycci System Control
You can use the Ycci system as the kit funnel.
You can control the operation timing by using the YMS software packed together with the kit
ECU.
You can also control the STD funnel by using the YMS software.
This set is made by MG Competition. For details of the specification, please check with MG
Competition.
TEL +33 (0) 4 50 25 59 96
FAX +33 (0) 4 50 25 59 98
Web http://www.mgcompetition.fr/
Extension funnel
Secondary funnel
Rubber seal
Wire

Yamaha 2010 YZF-R6 Specifications

General

Bore x Stroke	67.0mm x 42.5mm
Compression Ratio	13.1:1
Fuel Delivery	Fuel Injection with YCC-T and YCC-I
Ignition	TCI: Transistor Controlled Ignition
Final Drive	Chain
Rear Brakes	220mm disc; single-piston caliper
Front Tire	120/70-ZR17
Rear Tire	180/55-ZR17
Length	80.3 in
Width	27.8 in
Height	43.1 in
Seat Height	33.5 in
Wheelbase	54.1 in
Fuel Capacity	4.5 gal
Wet Weight	417 lb
Engine Type	Liquid-cooled, inline 4-cylinder, DOHC, 16 valves
Transmission	6-speed
Front Suspension	41 mm inverted fork; 4.7-in travel
Rear Suspension	Single shock; 4.7-in travel
Front Brakes	Dual 310mm disc; radial-mount 4-piston calipers