Yamaha TF3 - Page 23

Toolbar
User Guide
TF Editor
- 23 -
Features that can be assigned to USER DEFINED KEYS
FUNCTION PARAMETER 1 PARAMETER 2
Description
No Assign No feature is assigned.
Brightness Bank Change Switches between the brightness banks. (V1.1 and later)
CH ON Specific CH
CH 1–40,
ST IN 1, ST IN 2,
FX 1, FX 2,
DCA 1–8,
AUX 1–8,
AUX 9/10–19/20,
STEREO, SUB
Turns the channel assigned to PARAMETER 2 on and off.
CH Select
Inc
Select channels in order of the direction selected for PARAMETER 1.
Dec
Specific CH
CH 1–40,
ST IN 1L–ST IN 2R
FX 1L–FX 2R,
AUX 1–8,
AUX 9–20,
STEREO L, STEREO R,
SUB
Selects the channel assigned to PARAMETER 2.
CUE Specific CH
CH 1–40,
ST IN 1, ST IN 2,
FX 1, FX 2,
DCA 1–8,
AUX 1–8,
AUX 9/10–19/20,
STEREO, SUB
Turns the cue on and off for the channel assigned to PARAMETER 2.
Effect Bypass
FX 1, FX 2,
INS FX 1–6
Bypasses the effect assigned to PARAMETER 2.
Help Displays help information.
Meter Peak Hold ON Turns the peak hold on and off.
Monitor
Output Turns the monitor out on and off.
Source Select
STEREO, SUB,
ST IN 1, ST IN 2,
USB 33/34,
Playback
Selects the monitor source assigned to PARAMETER 2.
Oscillator
Oscillator On Turns the oscillator on and off.
Specific CH
AUX 1–20,
STEREO L, STEREO R
SUB
Turns the oscillator sent to the channel assigned to PARAMETER 2 on and off.
Page Change
Bookmark
Touch and hold for more than 2 seconds to bookmark the current screen. Touch and
hold for less than two seconds to display the bookmarked screen.
Bookmark with “SEL” The selected channel is saved with the bookmark. Same as above.
Close Popup Closes the popup screen.
Recorder Transport
Play/Pause Same as the Play/Pause button on the RECORDER screen.
Stop Same as the Stop button on the RECORDER screen.
Next Same as the Next button on the RECORDER screen.
Previous Same as the Previous button on the RECORDER screen.
Rec Same as the Rec button on the RECORDER screen.
Auto Rec
Recording stops and the file is saved, and then recording resumes immediately as a new
file.
Rec & Start Recording starts immediately without entering record-ready mode.
SCENE
Inc
Same as the INC, DEC, STORE, and RECALL keys.
Dec
Store
Recall
Inc Recall Recalls the next numbered Scene.
Dec Recall Recalls the previous numbered Scene.
Direct Recall/Store
No. A00–99,
No. B00–99
Recalls the Scene number assigned to PARAMETER 2. Touch and hold for more than two
seconds to assign the current settings to that Scene number.