Yamaha TF3 - Page 47

Main display area
User Guide
TF Editor
- 47 -
GATE REVERB, REVERSE GATE
One-input, two-output early reflection with gate, and an early reflection with reverse gate.
CHORUS
Two-input, two-output chorus effect.
FLANGE
Two-input, two-output flanger effect.
SYMPHONIC
Two-input, two-output symphonic effect.
PHASER
Two-input, two-output 16-stage phase-shift effect.
Parameter Range Description
Type Type-A, Type-B Early reflection type.
Room Size 0.1 - 20.0 Room size; determines interval between early reflections.
Liveness 0 - 10 Decay of the early reflections
Initial Delay 1.0ms - 500.0ms Delay before the early reflection.
Diffusion 0 - 10 Width of the reflections in the stereo field.
Density 0% - 100% Density of the reflections.
ER Number 1 - 19 Number of reflections.
Feedback Gain -99% - 99% Amount of feedback.
High Ratio 0.1 - 1.0 Amount of high-frequency feedback.
HPF Thru, 21.2Hz - 8.00kHz High-pass filter cutoff frequency.
LPF 50.0Hz - 16.0kHz, Thru Low-pass filter cutoff frequency.
Parameter Range Description
Frequency 0.05Hz - 10.00Hz Modulation speed
AM Depth 0% - 100% Depth of amplitude modulation.
PM Depth 0% - 100% Depth of pitch modulation.
MOD. Delay 1.0ms - 500.0ms Delay time of modulation.
Sync Off, On Parameter tempo sync.
Note - Value used to calculate the frequency based on the tempo.
Parameter Range Description
Frequency 0.05Hz - 10.00Hz Modulation speed
Depth 0% - 100% Depth of modulation.
MOD. Delay 1.0ms - 500.0ms Delay time of modulation.
Feedback Gain -99% - 99% Amount of feedback.
Sync Off, On Parameter tempo sync.
Note - Value used to calculate the frequency based on the tempo.
Parameter Range Description
Frequency 0.05Hz - 10.00Hz Modulation speed
Depth 0% - 100% Depth of modulation.
MOD. Delay 1.0ms - 500.0ms Delay time of modulation.
Sync Off, On Parameter tempo sync.
Note - Value used to calculate the frequency based on the tempo.
Parameter Range Description
Frequency 0.05Hz - 10.00Hz Modulation speed
Depth 0% - 100% Depth of modulation.
Feedback Gain -99% - 99% Amount of feedback.
Offset 0 - 100 Offset of the phase shifted frequency.
Phase 0° - 355° Left/right balance of modulation.
Stage 2 - 16 Number of phase shift stages.
HPF Thru, 21.2Hz - 8.00kHz High-pass filter cutoff frequency.
LPF 50.0Hz - 16.0kHz, Thru Low-pass filter cutoff frequency.
Sync Off, On Parameter tempo sync.
Note - Value used to calculate the frequency based on the tempo.