Yamaha XP500 - Page 221

4 - 23
CHAS
REAR WHEEL AND BRAKE DISC
2. Install:
• rear wheel sensor 1
NOTE:
_
When installing the rear wheel sensor, check
the rear wheel sensor lead for twists and the
sensor electrode for foreign materials.
CAUTION:
_
To route the rear wheel sensor lead, refer to
“CABLE ROUTING” in chapter 2.
1
T
R
.
.
30 Nm (3.0 m · kg, 22 ft · lb)
3. Connect:
• rear wheel sensor coupler 1
• rear wheel sensor lead holder 2
• clamps 3
CAUTION:
_
To route the rear wheel sensor lead, refer to
“CABLE ROUTING” in chapter 2.
4. Check:
• rear wheel sensor installation
Check if the wheel sensor housing is
installed properly.
Refer to “[D-4] Maintenance of the rear
wheel sensor and sensor rotor”.
3
3
2
1