EasyManua.ls Logo

Yamaha XP500 - Electrical Specifications

Yamaha XP500
559 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 - 15
SPEC
ELECTRICAL SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
Item Standard Limit
System voltage
12 V ----
Ignition system
Ignition system type Transistorized coil ignition (digital) ----
Ignition timing 10° BTDC at 1,200 r/min ----
Advancer type Digital ----
Crankshaft position sensor resis-
tance/color
189 ~ 231 Ω at 20 °C (68 °F)/gray–black ----
ECU (engine)
Model/manufacturer TBDF07/DENSO (XP500)
TBDF13/DENSO (XP500A)
----
----
Ignition coils
Model/manufacturer JO313/DENSO ----
Minimum ignition spark gap 6 mm (0.24 in) ----
Primary coil resistance 1.87 ~ 2.53 Ω at 20 °C (68 °F) ----
Secondary coil resistance 12 ~ 18 kΩ at 20 °C (68 °F) ----
Spark plug cap
Material Resin ----
Resistance 10.0 kΩ at 20 °C (68 °F) ----
Charging system
System type A.C. magneto ----
Model/manufacturer F4T383/MITSUBISHI ----
Standard output 14.0 V 350 W/5,000 r/min ----
Stator coil resistance/color 0.22 ~ 0.26 Ω at 20 °C (68 °F)/
white–white
----
Rectifier/regulator
Regulator type Semiconductor/short-circuit type ----
Model/manufacturer SH719AA/SHINDENGEN ----
No load regulated voltage (DC) 14.1 ~ 14.9 V ----
Rectifier capacity (DC) 25 A ----
Withstand voltage 240 V ----
Battery
Model GT9B-4 ----
Voltage/capacity 12 V/8 Ah ----
Manufacturer GS ----
Ten hour rate amperage 0.8 Ah ----
Headlight type
Halogen bulb ----

Table of Contents