1 - 23
GEN
INFO
SPECIAL TOOLS
90890-01362
YU-33270-B
Flywheel puller
This tool is used to remove the A.C. mag-
neto rotor.
Fork seal driver weight
90890-01367
YM-A5142-4
Fork seal driver
attachment
90890-01381
YM-A5142-2
Fork seal driver weight
Fork seal driver attachment (41 mm)
These tools are used to install the oil
seal, dust seal, and the outer tube bush-
ing of a front fork leg.
90890-01403
YU-33975
Steering nut wrench
This tool is used to loosen or tighten the
steering ring nuts.
90890-01469
Oil filter wrench
This tool is needed to loosen or tighten
the oil filter cartridge.
90890-01481
Sheave holder
This tool is used to hold the sheave
assembly when removing or installing the
primary and secondary sheave.
90890-01482
Clutch spring compressor
This tool is used to remove or install the
nut.
90890-01701
YS-01880-A
Sheave holder
This tool is used to hold the A.C. magneto
rotor.
90890-03008
YU-03008
Micrometers (50 ~ 75 mm)
This tool is used to measure the piston
skirt diameter.
Tool No. Tool name/Function Illustration
To Next Page
Loading...
