6. Checkweighing function
6-1. About the checkweighing function
The checkweighing function is Yamato’s original feature that helps the users carry out quicker and more
accurate weight measurement.
The Scalapro
™
has two checkweighing functions: the simplified checkweighing function and the inspection
checkweighing function.
Understand the features of each function, and make full use of them.
Simplified checkweighing function (#01: 1)
The weight of measured sample(s) becomes the lower limit of the proper weight range.
The system automatically sets the upper limit of the proper weight range, based on the amount
specified in the parameters.
[Example] if the measured weight of the samples is 2.00 kg and the scale interval is 0.01 kg:
Inspection checkweighing function (#01: 2)
The weight of measured sample(s) becomes the middle value of the proper weight range.
The system automatically sets the upper limit and lower limit of the proper weight range, based on the
amount specified in the parameters.
[Example] if the measured weight of the samples is 2.00 kg and the scale interval is 0.01 kg:
Proper weight
Overweight
Underweight
10 scale intervals
Proper weight range (if #P3: 1 and #P4: 10)
Measured samples
Upper limit
Underweight: 20 scale intervals to 1.99kg,
Proper weight: 2.00kg to 2.10kg,
Overweight: 2.11kg to Weighing capacity
Proper
weight
Overweight
Underweight
Proper
weight
±10 scale intervals
Proper weight range (if #P3: 1 and #P4: 10)
Measured samples Upper limit
Lower limit
Underweight: 20 scale intervals to 1.89kg,
Proper weight: 1.90kg to 2.10kg,
Overweight: 2.11kg to Weighing capacity
To Next Page
Loading...
Need help?
General
