6-2. How to select a checkweighing function
Before using the checkweighing function, set the user parameters.
Parameter number Description
#01:
Checkweighing function
#P3:
Unit of proper weight value for checkweighing
function
#P4:
Proper weight value for checkweighing function
Operation Display
Press
and at the same time to enter the user
parameter setting mode, and then set the parameter #01 to a function
you use.
Using the key
(+1) or (-1), toggle between the options.
When you reach the option you use, press
to switch to the
next parameter.
0: Disable the checkweighing
function
1: Simplified checkweighing
function
2: Inspection checkweighing
function
When the setting is complete, press
to turn off the power.
The system enables the change of the checkweighing function.
To Next Page
Loading...
Need help?
General
