To Next Page

To Previous Page

Introduction

Thank you for your purchase of the digital platform scale, Scalapro™.

You can use this instrument for a wide range of commercial activities, for example at

factories and general stores as well as in the fishery, greengrocery, and agricultural

industries. The system features “the checkweighing function” that allows you to easily carry

out a weight evaluation based on the specified upper and lower limits.

Thoroughly read this operation manual to use the Scalapro™ in an optimum condition for a

long time, and make full use of it.

- Table of Contents -

1. Read these instructions before use ....................................................................................................... 2

1-1. For safe and proper use ...................................................................................................................... 2

1-2. Cautions and instructions on use ........................................................................................................ 4

1-3. Functions ............................................................................................................................................ 5

1-4. Product package ................................................................................................................................. 6

1-5. Name of each part .............................................................................................................................. 6

1-6. To maintain the performance of the instrument ................................................................................... 7

2. Preparations before use .......................................................................................................................... 8

2-1. Assembling the instrument .................................................................................................................. 8

2-2. Place of installation ............................................................................................................................. 8

2-3. How to set the batteries ...................................................................................................................... 9

2-4. How to set the AC adaptor (option) ..................................................................................................... 9

2-5. Display panel and operation keys ..................................................................................................... 10

3. Basic operations ..................................................................................................................................... 11

3-1. How to weigh an item ......................................................................................................................... 11

3-2. How to reset the indication to zero ..................................................................................................... 11

3-3. How to turn off the power ................................................................................................................... 11

4. One-touch tare function ......................................................................................................................... 12

4-1. How to enable the one-touch tare function........................................................................................ 12

4-2. How to check the gross weight when the tare function is enabled .................................................... 12

4-3. How to exit the one-touch tare function ............................................................................................. 12

5. User parameters ..................................................................................................................................... 13

5-1. About user parameters ..................................................................................................................... 13

5-2. How to set a user parameter ............................................................................................................. 13

5-3. User parameter table ........................................................................................................................ 13

5-4. Description of each user parameter .................................................................................................. 14

6. Checkweighing function ........................................................................................................................ 15

6-1. About the checkweighing function ..................................................................................................... 15

6-2. How to select a checkweighing function ........................................................................................... 16

6-3. How to use the checkweighing function ............................................................................................ 17

7. Instruments for other than transactions or certifications .................................................................. 21

7-1. About instruments for other than transactions or certifications .......................................................... 21

7-2. User parameter of instruments for other than transactions or certifications ...................................... 21

7-3. Gravitational acceleration compensation for the region of use .......................................................... 22

7-4. How to conduct weight calibration ..................................................................................................... 23

8. Other topics ............................................................................................................................................ 24

8-1. Error messages ................................................................................................................................. 24

8-2. Specifications .................................................................................................................................... 26

8-3. Dimensional outline drawing ............................................................................................................. 27