7. Instruments for other than transactions or certifications
7-1. About instruments for other than transactions or certifications
If you use the Scalapro
™
for a purpose other than transactions or certifications, first you need to compensate
for gravitational acceleration according to the region of use. Otherwise, you may not be able to get the correct
measurements. Therefore, carefully read the upcoming section 7-3 “Gravitational acceleration compensation
for the region” and be sure to compensate for gravitational acceleration before proceeding with weight
measurement.
7-2. User parameter of instruments for other than transactions or certifications
For the Scalapro™ for a purpose other than transactions or certifications, the user can compensate for
gravitational acceleration according to the region of use and carry out span adjustment. Refer to the user
parameter table and set the parameter before use.
Number Name Setting: Function description
#09 Regional
compensation /
gravitational
acceleration
0: No regional compensation / gravity compensation
1 to 29: Not available for setting
30 to 210: (Gravitational acceleration (m/s
2
) - 9.7600) x 10000 ÷ 5 +
Offset (30)
Setting range: 9.7600 to 9.8500 m/s
2
Minimum setting increment: 0.0005 m/s
2
[Number #09] Regional compensation / Gravitational acceleration
The Scalapro
™
for other than transactions or certifications is equipped with the gravity compensation function.
Set the user parameter #09 - Regional compensation / gravitational acceleration to the value corresponding to
the region of use.
To Next Page
Loading...
Need help?
General
