EasyManua.ls Logo

Yamato Scalapro DP-6900 - For Safe and Proper Use

Yamato Scalapro DP-6900
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. Read these instructions before use
1-1. For safe and proper use
Carefully read this “For safe and proper use” before use, and properly use the product. By following the
instructions in this section, you can safely use the product, thus preventing harm to yourself and others and
also preventing damage to property.
In addition, carefully keep this manual in an appropriate place.
The hazardous levels and descriptions are defined in this manual as follows:
Danger
indicates that incorrect handling with disregard of the description could result in
death or severe injury.
Warning
indicates that incorrect handling with disregard of the description could result in
injury or property damage.
Caution
indicates that incorrect handling with disregard of the description could result in
physical impairment or equipment damage.
Don’ts
indicates a prohibited action that you must NOT do.
Dos
indicates a mandatory action that you must do.
Before using this product, carefully read and understand the following instructions labeled as “Danger,”
“Warning,” and “Caution,” and ensure to observe them.
Danger
: To avoid an electric shock
(1) Do not step on the AC adaptor cable with your foot or run over it with the wheels of a cart or other
equipment.
(2) Never remove any parts installed with screws, such as the indication unit.
(3) Hold the plastic main body of the AC adaptor and securely connect or disconnect the AC adaptor.
: To avoid an explosion or ignition
This instrument is not explosion-proof.
Do not use it where a combustible gas, hazardous material, or other hazards may be present.
: To avoid a fire or electrical shock
Using the instrument in abnormal conditions (e.g. it gives out smoke or foul smell) may lead to a fire
or an electric shock. In such a case, immediately unplug the power cable from the outlet.
Confirm that it gives out no more smoke, and then ask your vendor for repairs.
The users are strongly advised not to repair the product on their own as doing so is very
dangerous.

Related product manuals