Yamato Scalapro DP-6900 - How to Use the Checkweighing Function

6-3. How to use the checkweighing function
How to make the settings
Operation Display

Put the items used for the target value on the instrument.

Long press
until the rightmost digit flashes.
 During the setting, the “CHECK” sign flashes.
To finely adjust the target value,
Press
to decrease the target value by 1 scale interval.
Press
to increase the target value by 1 scale interval.
At that time, if the weighing value becomes unstable, the
adjusted indication will be canceled.

Press
to register the target value.
The system displays the lower limit and then the upper limit. Now, it is
ready to start weight measurement.
* During measurement, the “CHECK” sign changes from
flashing to steady light.
* The upper limit is automatically determined by the two user
parameters: #P03 - Unit of proper weight value for
checkweighing function and #P04 - Proper weight value for
checkweighing function.