How to confirm the setup values and start weight measurement (1)
Operation Display
Confirm that the panel shows 0.
Press
. The system displays the lower limit and then the upper
limit, and starts measurement using the checkweighing function.
* When the panel shows 0 with the checkweighing function enabled,
pressing
terminates the checkweighing function.
How to confirm the setup values and start weight measurement (2)
Operation Display
Confirm that the panel shows 0.
Press
to display the lower limit.
If you hold down
at this point, you can clear the
setting.
Press
to display the upper limit.
If you hold down
at this point, you can clear the
setting.
Press
to start weight measurement using the checkweighing
function.
To Next Page
Loading...
Need help?
General
