Yamato Scalapro DP-6900 User Manual

Message Cause Action
Span adjustment error
The weight(s) used for weight
calibration may have the
incorrect mass.
Check the weight(s) and carry out span
adjustment again. If the error still persists,
contact your vendor.
E2PROM write error
Invalid data are written into the
E2PROM.
Turn off the power, and then turn it on
again after a while. If the error still persists,
contact your vendor.
Electronic circuit error
An error has occurred at an
electronic circuit.
Turn off the power, and then turn it on
again after a while. If the error still persists,
contact your vendor.
Electronic circuit error
An error has occurred at an
electronic circuit.
Turn off the power, and then turn it on
again after a while. If the error still persists,
contact your vendor.
E2PROM write error
The writing into the E2PROM is
restricted.
Turn off the power, and then turn it on
again after a while. If the error still persists,
contact your vendor.

Yamato Scalapro DP-6900 Specifications

General

Brand	Yamato
Model	Scalapro DP-6900
Category	Scales
Language	English