A7-3
Spec
2 0 P 1 0
2 Three-phase 200VAC
4
Three-phase 400VAC
*1 IP20 standard on OP1 to 3P7
Always remove both top and bottom covers
when using the 5P5 and 7P5 inverters as
open chassis types IP00.
*2 NEMA 1 optional on OP1 to 3P7
NEMA 1 standard on 5P5 to 7P5
*3 NEMA 4 optional on OP1 to 7P5
No. Protective structure
0 Open chassis
(IP20, IP00) *1
1 Enclosed wall-mounted
(NEMA 1) *2
4 Water and dust tight
(NEMA 4/IP66) *3
7 Open chassis (IP20)
Top-closed type
No. Applicable maximum motor output
OP1 0.13 HP (0.1kW)
OP2 0.25 HP (0.2kW)
OP4 0.5 HP (0.4kW)
OP7 1 HP (0.75kW)
1P5 2 HP (1.5kW)
2P2 3 HP (2.2kW)
3PO 4 HP (3.0kW)
3P7 5 HP (3.7kW)
5P5 7.5 HP (5.5kW)
7P5 10 HP (7.5kW)
Ref Model
A 0 0 1
No. Current rating
001 0.8 A
002 1.6 A
003 3.0 A
A Three-phase 200VAC 005 5.0 A
008 8.0 A
011 11.0 A
017 17.5 A
025 25.0 A
033 33.0 A
001 1.2 A
002 1.8 A
003 3.4 A
B Three-phase 400VAC 005 4.8 A
009 9.2 A
015 14.8 A
018 18.0 A
To Next Page
Loading...
