YASKAWA GPD315/V7-4X User Manual

4-1
All functions of the Drive are accessed using the Digital Operator. In addition to controlling motor
operation, the operator can enter information into the Drive memory to configure the Drive’s
application, by using the Function LEDs.
A. Digital Operator Description
The Digital Operator has a 4-digit LED display. Both numeric and alpha-numeric data can appear on
the display.
Indicators and keys on the Digital Operator are described in Figure 4-1.
4.1 GENERAL
4.2 DIGITAL OPERATOR
Section 4. DIGITAL OPERATOR
MIN MAX
STOP
RESET
DATA
ENTER
FREF FOUT IOUT MNTR
F/R LO/RE PRGM
DSPL
Digital Operator
Potentiometer
(Pot) *
Display section
Data display
section
Function
LED s
Press to switch
between function
LED s.
RUN
DIGITAL
OPERATOR
JVOP-140
Press to stop the motor,
or reset a drive fault
Status indicator
Press to decrease
parameter no./data
value.
Press to increase
parameter no./data
value.
Press to run the motor.
V
V
Displays data
to be changed
and enters new
data.
1
Figure 4-1. Digital Operator
*
1
Not available on GPD315/V7-4x/12
NOTE:
The JVOP-140 is the standard digital operator for the GPD315/V7. The Digital Operator of the
GPD315/V7-4x/12 does not have a potentiometer (pot) and cannot be removed. All functions will be
identical with the exception of the pot and copy function (section 5-29).

YASKAWA GPD315/V7-4X Specifications

General

Brand	YASKAWA
Model	GPD315/V7-4X
Category	DC Drives
Language	English