YASKAWA HV600 Series - 1 General Information; Glossary; Screw Shapes; 2 Safety

1 General Information
6 YASKAWA TOEPC71061732E HV600 Drive Installation & Primary Operation
1 General Information
The products and specifications given in this manual and the manual contents can change without notice to make the
product and manual better.
Be sure to always use the latest version of this manual. Use this manual to correctly install, wire, set, and operate this
product.
Users can download additional manuals for this product from the Yaskawa documentation website printed on the back
cover.
◆ Glossary
Phrase Definition
Drive YASKAWA AC Drive HV600
EDM External Device Monitor
EZOLV EZ Open Loop Vector Control
IPM motor Interior Permanent Magnet motors
MFAI Multi-Function Analog Input
MFAO Multi-Function Analog Output
MFDI Multi-Function Digital Input
MFDO Multi-Function Digital Output
OLV/PM Open Loop Vector Control for Permanent Magnet Motors
PM motor Permanent Magnet Synchronous motor (generic name for IPM motors and SPM motors)
SIL Safety Integrity Level
SPM motor Surface Permanent Magnet motors
V/f V/f Control
■ Screw Shapes
Table 1.1 Icons to Identify Screw Shapes
Icon Screw Shape
Phillips/slot combo (+/-)
Slotted (-)
Hex bolt (cross-slotted)
Icon Screw Shape
Hex bolt (slotted)
Hex self-locking nut
2 Safety
Read the safety instructions carefully before you install, wire, or operate this product.
◆ Explanation of Signal Words
DANGER
This signal word identifies a hazard that will cause serious injury or death if you do not prevent it.
WARNING
This signal word identifies a hazard that can cause death or serious injuries if you do not prevent it.
CAUTION
Identifies a hazardous situation, which, if not avoided, can cause minor or moderate injury.
NOTICE
This signal word identifies a property damage message that is not related to personal injury.