13 European Standards
90 YASKAWA TOEPC71061732E HV600 Drive Installation & Primary Operation
A - SW (ON) B - Screw (OFF)
Figure 13.11 EMC Filter Switch Location 5
A - SW (ON) B - Screw (OFF)
Figure 13.12 EMC Filter Switch Location 6
A - SW (ON) B - Screw (OFF)
Figure 13.13 EMC Filter Switch Location 7
If you lose an EMC filter switch screw, use Table 13.8 to find the correct replacement screw and install the new
screws with the correct tightening torque.
NOTICE
Only use the screws specified in this manual. If you use screws that are not approved, it can cause damage to the
drive.
To Next Page
Loading...
