SD Card
Security
TrustStores ...
Security
Certificate Authentication
Firewall
SD Card
Syslog Configuration
User Authentication
Information
Diagnostics
Configuration
Administration
iC92...
PMC92...
n Status
– The status of the currently used file system of the CPU is shown here.
n Configuration
– Here you can enable (default setting) or disable the support of the Yaskawa SD
card by the CPU.
n System Message
– Information on the current configuration and notes on potential security risks are
shown here.
n [Apply] and [Discard]
– With the [Apply] button the selection is saved at Configuration and accepted after
a restart of the CPU.
– You can discard your selection with the [Discard] button.
1. Enable the ‘Support External SD card’ parameter.
2. Click on [Apply].
ð
The setting is saved and only applied when you restart the CPU.
Enable SD card deploy-
ment
iC9200 Series
Deployment
Web-based management - WBM > Security
HB700 | CPU | PMC921xEx | en | 23-06 100
To Next Page
Loading...
