3.
Enter your login details and click on .
On delivery, the following access data are preset with administrator
rights:
– Username: admin
– The password is printed under the front flap on the front of the
CPU.
ð
Now you can access your CPU. An existing connection is shown in the Plant
area at the node of the CPU by
.
4.4.4.1 Assigning new IP address parameters
As soon as you are online connected to the CPU, you can assign new IP address param-
eters to it via WBM (Web-based management).
1.
To access WBM, click in the ‘Cockpit’ editor at .
ð
The WBM login page opens.
Assignment via WBM
iC9200 Series
Deployment
Commissioning > Online access to the CPU
HB700 | CPU | PMC921xEx | en | 23-06 66
To Next Page
Loading...
