MotionSuite™ MP940 Machine Controller Hardware Manual Section 7: Limit Switch Inputs
44
If your application does not require limit switches, they can be disabled. To disable
the positive overtravel limit (P-OT), set the SGDH parameter Pn50A.digit3 to “8”.
To disable the negative overtravel limit (N-OT), set the SGDH parameter Pn50B.digit
0 to “8”.
Please read section 5.3.3 of the SGDH User’s Manual for further information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
