7.1 Trial Operation
7-3
7
Operation Key Display Description
Display the main menu of the utility function mode, and
select the utility function Fn002.
Press the Key.
Then, the screen changes and shows switches to the execu-
tion display of a jog operation (Fn002).
* If the screen does not change, and NO-OP is displayed in
the status display section, a write prohibited password has
been saved in Fn010. Clear the write prohibited password
if possible.
Press the Key.
The status display changes to RUN, and the motor enters a
servo ON state.
If the Key is pressed, the motor moves forward at
500 min
-1
.
If the Key is pressed, the motor moves in reverse at
500 min
-1
.
Make sure that the motor operation is completed, and then
press the Key.
The status display changes to BB, and the motor enters a
servo OFF state.
Press the Key.
Returns to the main menu of the utility function mode.
BB -FUNCTION-
Fn001
Fn002
Fn003
Fn004
BB -JOG-
Pn304 = 00500
Un000 = 00000
Un002 = 00000
Un00D = 00000000
RUN -JOG-
Pn304 = 00500
Un000 = 00000
Un002 = 00000
Un00D = 00000000
RUN -JOG-
Pn304 = 00500
Un000 = 00000
Un002 = 00000
Un00D = 00000000
BB -JOG-
Pn304 = 00500
Un000 = 00000
Un002 = 00000
Un00D = 00000000
BB
-FUNCTION-
Fn001
Fn002
Fn003
Fn004
SIEPS80000025.book 3 ページ ２００４年１０月２５日 月曜日 午前１１時５７分
To Next Page
Loading...
