7.1 Trial Operation
7-5
7
(3) Multi-turn Reset
Operation Key Display Description
Display the main menu of the utility function mode, and
select Fn008.
Press the Key.
Then, the screen changes and shows execution display of
Fn008.
Press the Key until PGCL5 appears.
Press the Key to clear the multi-turn data of the abso-
lute encoder. DONE is displayed for one second after the
setting have been made.
Turn OFF the power supply and then turn it ON again to enable the settings.
A. 810
-FUNCTION-
Fn007
Fn008
Fn009
Fn00A
A810
Multiturn Clear
PGCL1
A. 810
Multiturn Clear
PGCL5
DONE
Multiturn Clear
PGCL5
SIEPS80000025.book 5 ページ ２００４年１０月２５日 月曜日 午前１１時５７分
To Next Page
Loading...
