USING THE DIGITAL OPERATOR
3.2.5 Reference Offset Manual Adjustmentcont.
— 3-24 —
4) Press the and keys to change the
data to 03.
5) Press
DSPL
SET
to select the speed refer-
ence offset manual adjustment mode.
(The amount of speed reference offset is
displayed.)
6) Press the
and keys to adjust the
amount of offset.
(Adjust the speed references.)
7) Press
DSPL
SET
to return to the parameter
data display.
8) Press
DATA
ENTER
to return to the setting mode
display. This ends the reference offset
manual adjustment.
3
Set to 00-03.
keys to change the
value.
Press the
Speed Reference Offset
Manual Adjustment Mode
Setting Mode Display
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
