4.1Selecting a Servo Drive
— 4-3 —
4.1 Selecting a Servo Drive
This section describes how to select a Servomotor, Servopack, and Digital Operator.
4.1.1 Selecting a Servomotor
The selection of a Servomotor matched to the servo system in which it will be used is based
on the Servomotor model. The numbers (1) to (6) in the following diagram correspond to the
numbers in the Servomotor selection flowchart on the following pages.
Model Details
The seven alphanumeric characters after “SGMM-” indicate the Servomotor model, as
described in the following diagram.
• Standard Type
SGMM − A1 C 3 1 2
j
SGMM type
1) Rated output
A1: 10 W A2: 20 W A3: 30 W
B3: 3 W B5: 5 W B9: 10 W
2)
Supply voltage
B: 100 VAC (not drived by SGDF Servopack)
C: 24 VDC
S: EC safety standards, 24 VDC (10W, 20W)
3)
Encoder specifications
3: 2048 P/R incremental encoder
F: 1024 P/R incremental encoder
4)
Design revision order
6) Shaft specifications
2: Straight without key
3: Straight with flat seat
7) Option
C: With brake (24 VDC)
Σ-Series
SGMM Servomotor
Servomotor Selection Flowchart
Selected Servomotor
Example SGMM-A1C312
4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
