YASKAWA Sigma Mini SGMM Series - Checking Motor Type; Checking Software Version

USING THE DIGITAL OPERATOR
3.2.8 Checking Software Version
— 3-26 —
3.2.7 Checking Motor Type
This mode is used for maintenance. Set Cn-00 to 00-04 to select the motor-type check mode.
Operation
Set Cn-00 to 00-04
Motor type displayed
Modification Index
(Modification No.) displayed
Motor Type Display
Motor Type
Motor Capacity
Modification Index (Modification No.) Display
Hexadecimal Display
Modification index
(Modification No.)
6: SGMM 24 V
8A: 10 W
9A: 20 W
3.2.8 Checking Software Version
This mode is used for maintenance. Set Cn-00 to 00-06 to select the software-version check
mode.
Operation
Set Cn-00 to 00-06
Software version displayed
Software Version Display
Type
A: Speed/torque control
d: Position control
Software
Version
3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com