4.6Specifications and Dimensional Drawings of Peripheral Devices
— 4-61 —
4.6.5 Cable with CN1 Connector at One End Only
The following cables do not have a connector at the host controller end. The loose wires at the
host controller end are labelled with the terminal numbers.
Type L mm (feet)
JZSP-VFI01-01
1000
+100
0
(3.3
+0.33
0
)
JZSP-VFI01-03
3000
+100
0
(10
+0.33
0
)
Shielded cable
Connector: 54331-0201
Terminal number labels
Label
Shielded Cable:
AWG28 x 10 P, UL20276
Shrink tube
40 (1.57)
L
⋅⋅⋅
4.6.6 Circuit Breaker
The customer should purchase a circuit breaker (MCCB) of appropriate capacity to protect
the power lines.
•
Recommended Product
Ground fault detector for motor protection manufactured by
Mitsubishi Electric Co. Ltd.
Type: MN50-CF
Rated Current: 7.1 A
4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
