6.2Measures to Satisfy the EMC Directive
— 6-7 —
Cable Connections
To be prepared by the user
Shell + plug: 54331-0201
(Molex Japan)
To be prepared by the user
Socket Connector: 54280-0800
(Molex Japan)
Blue
White/blue
Yellow
White/yellow
Green
White/green
Red
Black
Connec-
tor case
Connec-
tor case
Shield
6.2.6 Control I/O
Use cables with CN1 connectors for control I/O. When using connector kits, use shielded
cable for the CN1 cable and make sure to ground between the cable shield and connector
case. Connect the shield at the host controller properly.
6.2.7 Digital Operator and Monitoring by Personal Computer
Use the Digital Operator or personalcomputer(for monitoring) for trialoperation only. Discon-
nect them during normal operation.
6.2.8 Cable Core
Model ESD-SR-25
Manufacturer Tokin Corp.
The cable line and line position where the core is attached is as follows:
6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
